Wantrn Offers all Fly killer spare parts and insect killer tube light at best price


Troubleshooting and repairing a fly killer machine can be a daunting task, especially if you don't know where to start. This article will provide a step-by-step guide on how to identify the problem, address the issue, and make sure your fly killer machine is up and running again in no time. By using this guide, you will be able to check the tube, ballast, and transformer of the machine to determine why it isn't working properly. You'll also learn what causes flickering issues and how to fix them. With this information, you'll have all the tools necessary to get your fly killer machine back in tip-top shape!


Fly Killer Machine Not Working - Step by Step 7 Checklist

Step 1: Check the Voltage Supply of the Machine  

Step 2: Inspect for Blockages take out expired insects from the grid coating

Step 3: Inspect the corner sides of UV lamps - any dark discoloration appearing on tubes.

Step 4: Tighten Any Loose Nuts and Bolts  

Step 5: Replace Faulty Light Bulbs or Tubes.

 Step 6: Inspect transformer working or not

Step 7: The uv light and starters are blinking.


Learn how to replace a fly killer light like an expert.






Three sizes of UV tube light are available: 1 Foot 8 watts, 1.5 Feet 15 Watts, and 2 Feet 18 Watts.

I. Introduction 
A. Overview of normal UV tube and shatterproof tube 
B. Purpose of recommending shatterproof tube for food processing center 

II. Benefits of using a shatterproof tube in food processing centers 
1 Increased safety and hygiene standards 
2.C. Benefits of using a shatterproof tube in food processing centers 
3. Reduces the risk of contamination or injury from broken glass  
4. Helps maintain hygiene standards and cleanliness in food processing areas  
5. Allows for efficient and effective transportation of materials throughout the facility  
6. Provides reliable protection from impact and other environmental conditions  

III. Cost Comparison Between Normal UV Tubes and Shatterproof Tubes 
A. Normal UV tubes are more affordable upfront  
B. Shatterproof tubes have a higher cost due to additional safety measures and longer lifespan  
C. Cost-benefit analysis on long-term use of shatterproof tubes 

IV. Conclusion  
 Final recommendation – use a shatterproof tube to ensure safety and efficiency in food processing centers



fly killer tube light
  • Fly Killer tube lights are available 8W, 10W, 15W, 18W 


  • To maintain good results, insect killer tubes should be changed at least every 12 months ( Recommend best insect killer tube light 


  • We recommend Philips UV tubes, as their most effective attraction and long life compare to other tubes, which reduces the amount of maintenance required.


  • Spare tube Lights clients can buy from our website, it's available on our website


  • if the model need requires starters, replace them yearly once





Electric fly killer not working
What steps should you take to Troubleshoot?


WANTRN Strongly suggested that you consult with a certified electrician or qualified service technician.


Step 1: Check at Lamps

  • If you notice a black shade appearing on the corner side of your tube, then you need to replace it immediately. Black color shades in tubes indicate that the lamp has been used up and needs to be changed. This is because when a lamp is used for a long time, it produces more heat than necessary and this can cause it to malfunction or even break down completely. The black shade indicates that the tubes have not been kept in proper condition and their working life has come to an end. Therefore, it is important to replace these tubes as soon as possible in order to avoid any further damage or accidents. It is also important to get it done by a professional electrician for safety reasons.


Step 2: Look at the Starter

  • It is important to check the starter properly before attempting to turn on a light. The starter is an important component of any lighting system and needs to be functioning correctly in order for the light to come on. If the starter is not flickering, then it is likely that the light will not turn on. It is also possible that other components may be malfunctioning as well, so it's important to thoroughly investigate any issues before attempting to fix them. If the starter is not working correctly, it could be due to a variety of reasons including a faulty switch, or even a defective bulb. In these cases, it may be necessary to replace the entire lighting system in order for it to function properly again. Furthermore, checking the starter regularly can help ensure that lights are working at their peak performance and avoid any unexpected breakdowns in future use


Step 3 Check the Mesh Grids

  • Before checking, it is essential to unplug the power source from the socketfly killer machine repair
  • Only use a screwdriver to check - do not use a tester or indicator because they will pass electricity through your body and this is very hazardous. Make sure to grip the plastic end of the screwdriver hold it plastic handle on the screwdriver and, most importantly, remove the power plug from the socket
  • When a touch screwdriver is applied to a mesh area, it will usually produce a sound. If no sound or sparking occurs when the screwdriver is touched 1 or 2 times, then there may be an issue with the circuit transformer. This could be due to a variety of things such as an internal short in the transformer or a loose connection. In some cases, it could even be due to faulty wiring or components. If this is the case, then it's important to address the problem immediately as any further damage can cause more issues and potentially dangerous situations. It's also important to ensure that all connections are properly secured and that all parts are in working order before attempting any further repairs. If sparking sounds come from the grid mesh area after touching it with the screwdriver, then it's likely that everything is fine and that the issue lies elsewhere.



How to replace Ballast on Bug Zapper?


The buzzing sound of the insect killer transformer indicates that it is operating, but the lights are not illuminated.


  • The new ballast should be the same size and type as the old one, usually a copper ballast, and you'll want to ensure that it's rated for the wattage of your lamp.
  • you'll need to unscrew it from its mounting bracket before disconnecting all of its wiring connections. Once this is done, connect all of your wiring connections to the new ballast and secure it in place with its mounting bracket, Finally reassemble all components and test your bug zapper, ensuring that everything is working correctly before use.
  • The new ballast should be copper-type for the best performance. Once you have purchased the new ballast, install it by following the instructions in the manual carefully
  • Make sure that all connections are secure and tight before testing if it works properly. If everything goes according to plan, your bug zapper should now be up and running again!



What is the procedure for installing a new Transformer on a flyer killer?


The Unit Lamps are in proper functioning condition,  but insects not killing properly it's flying away


  • When the transformer of a bug zapper is not working, you will notice that there is no buzzing sound coming from it. This means that insects are not being killed by the zapper and they will continue to buzz around your home
  • To replace the transformer, first, locate the accessories section at your local store and purchase a new one. Make sure to get one with the same voltage as your old transformer for optimal performance
  • Once you have obtained a new transformer, switch off the power to the bug zapper and replace it inside, taking care not to touch any electrical components. After screwing in the new transformer tightly, switch on the power again and listen for the sound of buzzing which indicates that it is now functioning correctly and killing bugs effectively.
  • To replace the transformer process, you must go to the service center.