Troubleshooting - Insect Killer
First Step - Switch off electric insect killer machine unplug socket!
| Issue | Reason | Solution |
|---|---|---|
| UV Lamps not lighting and shocking grid not working, but the main power on | No Power to the unit | Check supply cord properly fitted |
| Shocking grid continuously sounds coming | grids distance are very near | First, unplug the Device - then keep a small distance for each grid with the help screwdriver slightly adjust the gap between both grids |
| Lamps not starting, killing grid is working | Problem with lighting circuit. Lamps are not fitted properly | Check Lamps are fitted properly – see instructions. |
| Wrong Lamps fitted | Check Lamps Volt LAMP TYPE: see instructions | |
| problem with light ( any black color shade appeared on the tubes ) | Change lamps | |
| Tube light holder wire may loose | Both tube sockets wire should be properly fitted condition | |
| Shocking grid not working but UV lights working | dual grid not fitted properly | Ensure it is making a connection at the top of the killing grid with the high voltage connectors. |
| Defective Transformer | Replace the transformer | |
| Lamps not starting, lamp ends glow continuously | lamp weak | replace mosquito lamp |
| mosquito lamp not starting, flickering on starting also black shade on the right | Lamp defect | Change insect killer lamp |